Creamsicle Fudge {Easy Recipe} - Miss in the Kitchen (2024)

FAQs

Creamsicle Fudge {Easy Recipe} - Miss in the Kitchen? ›

The key to creamy, luscious fudge is controlling crystal formation. If the sucrose (table sugar) crystals are small, the fudge will feel creamy and smooth on your tongue. But if the crystals are large, the fudge develops a crumbly, dry, or even coarse texture.

The key to creamy, luscious fudge is controlling crystal formation. If the sucrose (table sugar) crystals are small, the fudge will feel creamy and smooth on your tongue. But if the crystals are large, the fudge develops a crumbly, dry, or even coarse texture.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

To fix it, you can reheat the fudge mixture over low heat and continue cooking until it reaches the proper temperature. Be sure to use a candy thermometer to monitor the temperature accurately. Alternatively, you can try to salvage chewy fudge by mixing it into ice cream or using it as a topping for desserts.

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

Sugar Crystals Formed

It's important to beat the fudge ingredients to develop the right texture, but you won't get smooth, creamy fudge if you beat it when it's too hot. Beating fudge when it's still over heat creates sugar crystals, aka the grittiness you feel in the fudge.

Brush the sides of the pan with a wet brush at the beginning of cooking to dissolve sugar crystals stuck to the sides. Never stir the mixture during cooking or sugar could crystallize again.

Good use of failed fudge: fudge that is too hard, too soft, too runny, too sugary, too chewy, etc. Proportions are as follows: for every 2 cups (roughly 1 pound yield) of any failed fudge that is not runny, you'll need 1 egg, ½ cup all-purpose flour, and ½ cup milk. If fudge is soupy, halve the milk (to ¼ cup).

As water gradually evaporates, sugar is concentrated and the temperature of the mixture rises above 100°C (212°F). If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard.

If your fudge is crumbly, it means that you cooked it for too long. Too much water evaporated during the cooking process, and not enough moisture was left behind, which is what creates the dry crumbly texture. Be sure to set your timer and remove the saucepan from the heat the second it goes off.

How do you beat fudge? ›

When the fudge cools to 110 degrees F/43 degrees C, beat the mixture vigorously with a wooden spoon until it's no longer glossy. Then you can stir in the nuts, or any other extra flavorings, and transfer it to the cooling pan. Adding Butter to Fudge | Photo by Meredith.

NEVER REFRIGERATE your fudge as this will draw out the moisture and leave you with dry, crumbly fudge.

Points to remember

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

Don't stir the fudge while it is cooking. During the cooking process, very tiny crystals form from the sugar, giving the fudge its smooth texture. When you stir the fudge it encourages the sugar crystals to attach to each other and get bigger, or crystallize, which is what causes the fudge to become grainy.

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

Crystal formation is a key factor in creating the perfect texture for your fudge. When the sugar dissolves and reaches the desired temperature, it begins to form crystals as it cools. These crystals give fudge its characteristic structure and prevent it from being too soft or grainy.

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

If fudge is left unwrapped or accidentally put in a cold area/refrigerator then the result can be hard fudge. It is possible (but not guaranteed) to reverse this process by wrapping up your fudge in several layers of clear wrap. This allows the moisture to re-permeate into the fudge & make it soft again.