Journal, Engineering, Technology, Model, Mathematical, Publication, Papers, Services, Electronic, Conferences, Books, Monographs, Biology, Earth, Network Technology , Food Technology , Engineering Technology, Educational Technology , Nanotechnology , Bio (2024)

OPEN ACCESS POLICY

New Design Ideasprovides full open access to its content to make research freely available and contribute to the global and unlimited exchange of knowledge. As the papers are published underCreative Commons CC BYlicense and the use copyright is regulated by the terms of this statement. Open Access basis allows authors to retain the copyright to the article and have their papers published with immediate and unrestricted access. It means immediate deposit of the published paper in other repositories without restriction on re-use.

PUBLICATION ETHICS

The journalNew Design Ideasworks following theCommittee on Publication Ethics (COPE)standards on publications ethics.

Research results
We strongly condemn fabrication, falsification or selective reporting of data with the intent to mislead or deceive. We consider this as the theft of data or research results from other authors. The results of research should be recorded clearly and should allow to analysis and review.

Authorship
All persons made a significant contribution should be recorded as authors. The persons contributed to the work should be acknowledged. We encourage the authors to insert full list of the current institutional affiliations.

Competing interests
We strongly recommend the authors, referees and editors to declare any conflicting or competing interests relating to a given article. Competing interests through their potential influence on the publication decision on the given paper that can lead to the wrong value of publication.

Plagiarism
Any kind of plagiarism as well as reproducing text from other papers without properly crediting the source or producing many papers with almost the same content by the same authors is strongly not acceptable forNew Design Ideas. Authors may present results obtained only by themselves. Authors should cite the publications that have been used in obtaining the results presented in the paper.

Duplicate submission
Simultaneous submissions of the same manuscript to different journals is not acceptable. Such papers will be immediately removed from the list of the papers under evaluation.

Corrections and retractions
Submitting their paper the authors undertake an obligation to provide prompt retractions or correction of errors in published works. The reviewers’ remarks should be clearly answered and inserted in the paper if acceptable. The authors should submit the final version of the paper prepared in the journal format and style.

Any cases of ethical misconduct are treated very seriously and will be dealt with using the guidelines issued by the COPE. For further details please visit:

Code of Conduct for Journal Editors
Code of Conduct for Journal Publishers

PEER REVIEW POLICY

Aiming to publish only high-quality papers, we evaluate them through strong peer review process that mainly considers:

  • The manuscript should not be submitted to the different journals at the same time.
  • Manuscripts should be in the scope of the journal.
  • All submitted manuscripts pass through double blind reviewing process.
  • In some cases Editors can invite additional reviews.
  • Editors-in-Chief makes main decision on the manuscript basing on the referees' reports. The Authors are notified promptly about the decision made.
  • The submitted manuscripts are considered as confidential documents. We inform all our editors and reviewers that they should treat manuscripts as a confidential documents.
  • We inform our Editors and Reviewers that they should declare if they have any conflicts of interest resulting from direct competitive, collaborative, or other relationships with any of the authors. In the cases above they are removed from the process of evaluation.
  • The review process is confidential and we do not disclose the names of the persons involving this process.

Note:
The journalNew Design Ideasstrongly condemns all kinds of plagiarism and all submitted manuscripts are checked using proper software subject to copying text or results from other sources, self-plagiarism etc.

COPYRIGHT POLICY

Upon acceptance of an article, Authors receive the copyright that will ensure the widest possible dissemination of information. As the papers are published under theCreative Commons CC BY, the terms and conditions of the copyright are regulated by the terms of this statement that partially means that:

  1. Authors retain copyright and grant the journal right of the first publication with the work simultaneously licensed under a Creative Commons Attribution License. This allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the published version of the work, with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

Journal, Engineering, Technology, Model, Mathematical, Publication, Papers, Services, Electronic, Conferences, Books, Monographs, Biology, Earth, Network Technology , Food Technology , Engineering Technology, Educational Technology , Nanotechnology , Bio  (2024)

FAQs

What is the impact factor of engineering technology? ›

As expected and previously announced, "Engineering, Technology & Applied Science Research" was included in the latest Journal Citation Reports and Clarivate has informed us that the current Impact Factor (IF) for our journal is "1.5".

Is engineering and technology peer reviewed? ›

Engineering Science and Technology, an International Journal (JESTECH) (formerly Technology), a peer-reviewed monthly engineering journal, publishes both theoretical and experimental high quality papers of permanent interest, not previously published in journals, in the field of engineering and applied science which ...

What is the meaning of engineering and technology? ›

Engineering is defined as a systematic and iterative approach to designing objects, processes, and systems to meet human needs and wants. Technology is defined as any modification of the natural or designed world developed to fulfill human needs or desires.

What is the ISSN number of the International journal of engineering and Technology? ›

ISSN 0975-4024 (Online) | International journal of engineering and technology | The ISSN Portal.

What is the impact factor of the journal of Electrical Engineering and Technology? ›

Journal of Electrical Engineering & Technology
YearImpact Factor (IF)Total Cites
20211.5282036
20201.0691703
20190.7361348
20180.7151212
9 more rows

What is the impact factor of environmental engineering science? ›

Impact Factor: 1.8* *2022 Journal Citation Reports™ (Clarivate, 2023) Exploring innovative solutions to problems in air, water, and land contamination and waste disposal, with coverage of climate change, environmental risk assessment and management, green technologies, sustainability, and environmental policy.

How do you know if it is peer-reviewed? ›

If you are unsure whether or not an article is peer reviewed, you must look at the journal rather than the article. One of the best places to find out if a journal is peer-reviewed is the journal website. Most publications have a journal website that includes information for authors about the publication process.

How do you check if it is peer-reviewed? ›

You can type the name of the journal into any search engine and learn about the submission process to see if it is peer reviewed. Additionally, if you use the library search or a database to find articles, they will usually indicate if it is from a peer reviewed journal.

Is peer-reviewed good or bad? ›

Peer reviewing is an opportunity to improve the quality of published research, and is very valuable to the research process when it works well.

Who is the greatest engineer of all time? ›

Nikola Tesla

The inventor, creator, electrical engineer and mechanical engineer was an inventor way beyond his times with his futuristic innovations. The engineer invented the induction motor, fluorescent lighting and Tesla coil, all important inventions still in use today.

What type of engineer makes the most money? ›

In terms of median pay and growth potential, these are the 10 highest paying engineering jobs to consider.
  • Systems Engineer. ...
  • Electrical Engineer. ...
  • Chemical Engineer. ...
  • Big Data Engineer. ...
  • Nuclear Engineer. ...
  • Aerospace Engineer. ...
  • Computer Hardware Engineer. ...
  • Petroleum Engineer.
Mar 24, 2024

Is engineering harder than Engineering Technology? ›

A Bachelor of Science in Engineering degree program often includes more advanced levels of applied science and mathematics than are taught in an Engineering Technology degree program.

Which country is the International Journal of Engineering and Technology? ›

International Journal of Engineering and Technology (IJET) is an international academic open access journal which gains a foothold in Singapore, Asia and opens to the world. It aims to promote the integration of Engineering and Technology.

What is the International journal of Recent Trends in Engineering and Technology? ›

The “International Journal of Recent Trends in Engineering & Research“ (IJRTER) is a peer-reviewed, monthly, online international research journal, which publishes original articles, research articles, review articles with top-level work from all areas of Engineering Research and their application including Mechanical, ...

What is the International journal of Emerging Trends in Engineering and Technology? ›

IJETED aims to strengthen the partnerships between all disciplines of engineering to develop the current technologies. IJETED provides a vehicle to help professionals, academics, researchers and policy makers to disseminate information and to learn from each other's work.

What is the impact factor of the journal of Engineering and Technology Research? ›

Impact Factor of International Research Journal of Engineering and Technology (IRJET) is 7.529 for the year 2020 which is calculated by SJIF - Scientific Journal Impact Factor, Morocco.

What is the impact factor of IEEE IES? ›

According to the recent JCR report released this year, the Impact Factors of our Industrial Electronics Society publications (and their ranking among all IEEE publications) for the year 2022 are the following: IEEE Industrial Electronics Magazine IEM: 6.3 (58th position in IEEE 2022)

What is the impact factor of journal results in engineering? ›

Important Metrics and Factor
TitleResults in Engineering
SCImago Journal Rank (SJR)0.592
Impact Score5.12
PublisherElsevier BV
CountryNetherlands
8 more rows

What is the impact factor of IET nanotechnology? ›

About IET Nanobiotechnology
YearImpact Factor (IF)Total Articles
2022 (2023 update)2.3-
20212.050-
20201.847122
20191.859143
9 more rows

References

Top Articles
Latest Posts
Article information

Author: Ray Christiansen

Last Updated:

Views: 6774

Rating: 4.9 / 5 (69 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Ray Christiansen

Birthday: 1998-05-04

Address: Apt. 814 34339 Sauer Islands, Hirtheville, GA 02446-8771

Phone: +337636892828

Job: Lead Hospitality Designer

Hobby: Urban exploration, Tai chi, Lockpicking, Fashion, Gunsmithing, Pottery, Geocaching

Introduction: My name is Ray Christiansen, I am a fair, good, cute, gentle, vast, glamorous, excited person who loves writing and wants to share my knowledge and understanding with you.